Living and Home Double Bowl Quartz Resin Composite Kitchen Sink with Waste Kit, Graphite Grey, 116cm (W) x 50cm (D) x 20cm (H)

Description Streamline everyday kitchen tasks with this sleek double-bowl kitchen sink. Featuring two separate basins, it makes washing and rinsing effortless while food prep stays organised and uninterrupted. An integrated drainer on the right provides a convenient space for drying plates, cutlery, and freshly rinsed ingredients. Smooth rounded corners keep water flowing and reduce hard-to-reach grime, so cleaning feels quicker after busy cooking. A complete drainage package supports straightforward installation, helping you set up confidently and enjoy reliable performance from day one. Features • [Quartz Resin Composite Build]: One-piece construction resists daily wear, stains, and high temperatures. • [Standard 35mm Tap Hole]: Pre-drilled opening enables quick tap installation without additional modifications. • [Overflow Protection]: A built-in overflow port helps prevent accidental water spills when the sink is left unattended. • [Clog & Odour Control]: A removable basket strainer catches food debris while a lid blocks odours and holds water when needed. Specifications Overall Dimensions: 116cm (W) x 50cm (D) x 20cm (H) Pre-Drilled Faucet Hole Diameter: 35mm Overflow Hole Diameter: 30mm Material: Quartz Resin Composite + 201 Stainless Steel Colour: Graphite Grey Shape: Rectangular Type: Double Bowl Number of Tap Hole(s): 1 Tap Included: No Installation Type: Under-mount Assembly Required: Yes Package Content 1 x Double Bowl Sink 1 x Waste Kit Package Specifications Package Dimensions (W x D x H): 127cm x 61cm x 33cm Gross Weight: 29kg Notes - Always wear eye protection and cut-resistant gloves when cutting the countertop or drilling holes. Flying debris or tool slips can cause serious injury. - Despite efforts for accuracy, there may be some reasonable error due to manual measurement. - Actual product colours may vary due to monitor settings & lighting. Installation Instructions - Turn the sink upside down and place it in exactly the place on the countertop where you want to install it. - Measure the width, length and depth of the sink. - Make sure the new sink will have sufficient space to install a battery outlet located under the sink. - Mark the location of the sink by tracing its perimeter. Then remove the sink from the countertop. - Draw a cut line inside the perimeter that will copy the original wrap around the sink, but it will be shifted by 12 mm. - If the sink comes with a template for the sink cutout, use the template for tracing. - In this case, make sure you have the template placed the right way. - When you are sure of the placement, at any point along the cut line, drill a hole big enough to accept the blade from your jigsaw. With a jigsaw, cut the opening along the cut line (the line inside the sink's perimeter line). - Before stamping the faucet's hole, check the place of the predrilled hole at the bottom. - Using the drill with a drill bit ø3 mm, drill holes around the edge of the pre-drilled hole. Hold a sharp pointed object (such as a screwdriver) and a hammer, and strongly wallop in the middle of the predrilled hole. Then clean up the hole fine with rasps. - Before installing the sink, apply sanitary silicone (not included) on its inner edge. - Carefully flip the sink and insert it into the hole of the countertop. Then install the other parts of the siphon.